Powerful 130 W Burner with Long Lifetime
The powerful 130 W burner has an average lifetime of 2,000 hours. This greatly reduces running costs compared to traditional mercury burners, with no compromise to illumination quality.
Stable and Uniform Light Output
The DC-powered burner delivers excellent short- and long-term stability, ensuring that experiment settings can be reproduced time and time again.
Even illumination – Alignment free
The pre-centered burner eliminates complicated alignment procedures for very easy installation. Illumination is always even across the entire field of view.
Minimized Light Guide Deterioration
Built-in UV- and IR-cut filters (340 nm; 780 nm) cut off UV and IR wavelengths, which can shorten the light guide’s lifetime. This ensures cost-effective use of the system in the long term.
The incorporated six-step iris effectively controls intensity. Intensity can be set to 100 %, 50%, 25 %, 12 %, 6 %, 3 % and 0 %.
Less Vibration and Heat
The light source is coupled via a light guide, which reduces thermal effects and vibration at the microscope frame for more accurate visualization of a range of samples.
|Lamp||Highly stable 130 W Mercury Vapor Short Arc, DC-powered|
|Lamp Centration||Pre-centered, with reflector|
|Light Guide||Liquid light guide Ø 3 mm, 1,5 m or 3 m length, typical life time 4000 h|
|Warm-Up Period||90 seconds (typical)|
|Panel Controls||Power On/Off, reset accumulated lamp hours, intensity setting (100 %, 50 %, 25 %, 12 %, 6 %, 3 % 0 %)|
|Panel Displays||Accumulated lamp hours|
|Dimensions||111 (W) x 336 (D) x 216 (H) mm|
|Operating Environment||Indoor use|
|Ambient temperature: 5 º to 40 ºC (41 º to 104 ºF)|
|Maximum relative humidity: 80% for temperatures up to 31 ºC (88 ºF), decreasing linearly through 70 % at 34 ºC (93 ºF), 60 % at 37 ºC (99 ºF), to 50 % relative humidity at 40 ºC (104 ºF)|
|Supply voltage fluctuations : Not to exceed ±10 % of the normal voltage|